On 4 February 2019 the European Commission (EC) tabled a proposal concerning the amendment of Regulation (EU) 2015/757 on the monitoring, reporting and verification of carbon dioxide emissions from maritime transport (the “EU MRV Regulation”). The main objective of the proposal is to amend the EU MRV Regulation in order to take account of the
On 4 February 2019 the European Commission (EC) tabled a proposal concerning the amendment of Regulation (EU) 2015/757 on the monitoring, reporting and verification of carbon dioxide emissions from maritime transport (the “EU MRV Regulation”). The main objective of the proposal is to amend the EU MRV Regulation in order to take account of the new Global Data Collection System (“IMO DCS”) for fuel oil consumption of ships that was introduced by the International Maritime Organisation (IMO) in March 2018. The globally applicable IMO DCS system currently runs in parallel with the EU MRV, thus duplicating regulation for shipping companies whose ships sail both inside and outside the EU. In this article we provide a recap of both data monitoring and reporting systems, comparing and contrasting the two as well as highlighting the key amendments that are being proposed by the EC.
As part of the IMO’s efforts to reduce greenhouse gas emissions from ships (by 50% by 2050) the amendments to MARPOL Annex VI, Regulation 22A, on the fuel oil data collection of ships came into force on 1st March 2018. Regulation 22A requires ships of e”5,000 gross tonnage sailing internationally to collect consumption data for each type of fuel oil they use. All relevant ships were required to have a Data Collection Plan (DCP) within the Ship Energy Efficiency Management Plan (SEEMP) Part II and these were to be submitted for review to the Flag administration or a duly authorized organization before 1st September 2018. The review was to have been completed by 31 December 2018 in time for the start of the first annual compliance period which runs from 1 January 2019 to 31st December 2019. This means that from 1 January 2019 the following data must be collected for the ships and submitted to their Flag State for that compliance period:
14 Ships Arrive Lagos Ports With Petrol, Other Goods
The IMO’s ‘2016 Guidelines for the development of a Ship Energy Efficiency Management Plan (SEEMP)’ set out ways in which ships can monitor fuel oil consumption, such as by using bunker delivery notes, flow meters, and bunker fuel oil tank monitoring on board. Importantly and unlike the EU MRV, the IMO DCS comprises any activity carried out by ships operating in the marine environment. Thus, such maritime activities as dredging, pipeline laying, ice-breaking, fish-catching and off-shore installations are also included.
Data of the ships first compliance period is to be reported to the Flag State by the end of March 2020 (i.e. a 3 month reporting period following the end of the compliance year). Following this, and assuming all is in order, the Flag State is to issue a Statement of Compliance by no later than 1 June 2020 and will pass on the data to the IMO. Analysis of the data by the IMO will take effect from Q3 of 2020 and subsequently on an annual basis. The “Initial IMO Strategy on Reduction of GHG Emissions from Ships” (Resolution MEPC.304(72) adopted on 13 April 2018) signals that further emission reduction mechanism(s), possibly Market-based Measures (MBMs) to incentivize greenhouse gas (GHG) emission reduction will be decided upon in Spring 2023 at the MEPC 80.
The IMO DCS began exactly one year after the EU MRV. Whilst the IMO DCS requires the reporting of ships’ fuel consumption data, the EU MRV requires the reporting of CO2 emission; the weight of cargo carried and/or the number of passengers carried (as applicable) and energy efficiency. The EU MRV applies to commercial ships carrying passengers or cargo to/from European ports.